Datavideo MP6000MD - Manual (Page 25)

24
Recording a Disc
With the Video Input selected and the Record Quality selected you are now ready to make a recording.
Inserting a Disc
It is most important that you handle DVD+R / RW discs with care. Do not touch the underside of the disc,
fingerprints, smudges and scratches are likely to make the recording fail. Discs should be stored in a cool,
dry place out of direct sunlight; they should not be exposed to extremes of temperature.
Formatting a New Disc
If you are using a brand new disc that has never been recorded previously, it must first of all be formatted.
The MP­6000 MD will automatically format a new disc for you.
Press the Eject button, the message OPEN will be displayed on the LCD display, and the disc tray will
open.
Place a new DVD+R / RW disc on the disc tray; label/printed side up.
Press the Eject button again, so that the tray retracts, and the CLOSE message appears.
After a few seconds the message will change to READING, and after a few more seconds it will return to
the general display.
On the TV monitor you will see this message
After about 20 seconds the message will disappear, and the disc is ready to use.
DVD+R
Press the Eject button, the message OPEN will be displayed on the LCD display, and the disc tray will
open.
Place a blank DVD+R disc on the disc tray; label/printed side up.
Press the Eject button again, so that the tray retracts, and the CLOSE message appears.