Notes, Pg-c dip switch settings, Optional – Aiphone ROAMER WP100A User Manual
Page 5: Fi wiring diagrams
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
fi WIRING DIAGRAMS
MC-60/4A WITH WIRELESS ROAMER SYSTEM
- With Aiphone PG-C Series Amplifier -
ANA9500 Phone Base
NOTES:
1. Lines 3 and 4 of the intercom are wired for
communication with the Roamer phone. The ring
jumpers allow the MC-60/4A to call the ANA9500
phone by selecting channel 4. Press "TALK" on
the phone to answer the call.
2. To call from the phone to the MC-60/4A system,
Press "TALK" and either “3” or "4".
3. Pretone will sound when paging from either the
MarketCom or ANA9500 phone when using the
PG-C series amplifier.
4. MC-60/4A handsets must be vi/ired in blocks with
maximum 10 stations per block.
PG-C DIP SWITCH SETTINGS:
* Before operating the system, be sure to configure
the dip switches as foilows:
1 & 2: ON (Upper position)
3: OFF (Lower position)
4 through 7: ON (Upper position)
8: OFF (Lower position)
Optional:
6 = Pretone on/off. If no pretone is desired, move
switch 6 to OFF position.