Canon FAX-B155 - Manual (Page 72)

60
Cancelling Sending _____________________________
To stop sending before the fax is finished, press [Stop]. Then you may need to open
the operation panel to remove the document. See Clearing document jams, p. 62.
Redialling _______________________________________
■ Manual
To start dialling again, just press [Redial/Pause]. (When you press [Redial/Pause],
the previous number dialled with the numeric buttons is redialled.)
■ Automatic
The fax automatically redials twice* after the first attempt at sending fails (e.g. the
line was busy).
The time between redials is two minutes.*
You can change the number of redials and the time between redials by changing the
AUTO REDIAL setting in the TX SETTINGS (see p. 87).
If the fax fails to get through after the second redial, the fax beeps.
*Factory setting
The LCD displays REDIALING while the fax is in the redialling process.
REDIALING
■ To cancel automatic redialling
You can cancel automatic redialling anytime by pressing the [Stop] button.
However, when memory is used during sending (including Delayed Sending and
Sequential Broadcasting), you cannot cancel redialling while REDIALING or
MULTI TRANS. ON is displayed on the LCD. In this case, wait until dialling
begins, then press [Stop] to cancel redialling.