Canon FAX-B155 - Manual (Page 43)

31
PREP
A
RING TO USE YOUR F
AX
2
4 The next character is in the same group, so press [ ] to move the cursor to the
right first. Then press the numeric button repeatedly.
Cano
Press [ ] once. Then, press [6] three times.
5 The next character is also in the same group, so press [ ] to move the cursor
to the right first. Then press the numeric button repeatedly.
Canon
Press [ ] once. Then, press [6] twice.
6 The next character is a space. Simply press [Space].
Canon _
Press [Space] once.
7 The next character is a digit. Press the numeric button corresponding to the
digit. (For digits other than 0 and 1, press repeatedly until the digit appears.)
Canon 1
Press [1] once.
8 After entering a name, press [Start/Copy].
❚ You can enter up to 16 characters in a name.
❚ To enter a space between characters, press [Space] or move
the cursor to the right using [ ].
❚ To correct a mistake, use the arrow buttons to move the cursor
under the mistake; then enter the correct character. You can
also press [Clear] to begin again; then simply enter the
name again.
❚ To erase a previously registered name, press [Clear] or simply
enter the new name over the old one.
Registering your name and number
01
Send Options
02
Report
03
Cleaning
R
04
05 06
Space
Tone
07
Clear
D.T.
08
09 10