Canon FAX-B155 - Manual (Page 132)

120
Appendix
What happens when Fax/Tel Mode is selected
To select Fax/Tel Mode
1
Press [Receive Mode] until “Fax/Tel Mode” appears in the LCD.
To change the Fax/Tel Mode settings:
1
Press [Function].
2 Press [ ] until RX SETTINGS is displayed in the LCD. Press [Start/Copy].
3 Press [ ] until FAX/TEL SWITCH is displayed in the LCD. Press [Start/Copy].
4 The LCD displays RING START TIME. Press [Start/Copy]. Choose between 0 and 30 SECONDS using
the numeric buttons, then press [Start/Copy] again.
5 The LCD displays F/T RING TIME. Press [Start/Copy]. Choose between 10 and 300 SECONDS using the
numeric buttons, then press [Start/Copy] again.
6 The LCD displays F/T SW ACTION. Press [Start/Copy]. Press [ ] or [ ] to choose RECEIVE or DIS-
CONNECT. Press [Start/Copy].
7 Press [Stop] to finish registration and return to the standby mode.
Sending document
manually
Sending document
automatically
Fax Fax Telephone
Fax answers without ringing
Fax starts ringing
FAX TONE is not detected
FAX TONE
detected
Choose between:
Receive (Factory setting) and Disconnect
Pick up the
telephone to talk.
Document received
automatically.
(FAX TONE is
detected and fax
switches to receive
mode.)
F/T SW ACTION
RECEIVE
DISCONNECT
(Factory setting)
Not all fax machines are capable of sending a
FAX TONE. For those cases if you set the F/T SW
ACTION to RECEIVE, the fax switches to receive
mode automatically and starts receiving the document.
If no document comes in it disconnects.
Fax disconnects the
call.
Type of call
Tel. charges begin
for caller.
F/T RING TIME
(Factory setting = 22 sec.)
Fax listens for FAX TONE
(For 8 sec.)
If you do not pick up the telephone
within 22 seconds
RING START TIME
(Factory setting = 8 sec.)