Canon FAX-B155 - Manual (Page 19)

7
SETTING UP
1
Loading the paper
Selecting the right kind of paper ______________
The quality of the paper you use affects the print quality of the fax. Using paper that
meets the following specifications will ensure the best possible printing results.
Quality Use plain bond, typewriter quality without curls, folds, or rough
edges.
Weight 64 g/m 2 – 90 g/m 2
Thickness 0.08 mm – 0.13 mm
Storage 18
°
C to 24
°
C, 40% to 60% relative humidity
Size A4, Letter, Legal
• Test the plain bond paper you intend to use first to make sure printing
results are satisfactory.
• Do not use punched or coloured paper.
• Do not use glossy paper.
• Ink drying time will vary depending on the type of paper.
• Using paper other than the above may cause jamming and/or blurred
printing.
■ Setting the paper size
The paper size setting determines the size of the recording paper in the paper tray.
The factory setting is A4 size. If you want to use a paper size other than A4, you
must change the PAPER SIZE setting. See FAX PRINTER, p. 88.
Loading the paper _____________________________
1 Remove the paper tray cover. 2 Fan a small stack of up to 100 sheets (up
to 10 mm thick). Tap the edge of the stack
on a flat surface to even the stack.