Aiwa NSX-MT725 - Manual (Page 4)

PREPARATIONS
i.
I
The DOLBY PRO LOGIC system which is the biggest feature of
this stereo system provides you with muiti channei sound in your
home.
Complete setting and connection of the main unit, suppiied
speakers, yourTV and video equipment according to the foiiowing
procedure.
Check your system and accessories
NSX-MT725
CX-NÌVIT725 Compact disc stereo cassette receiver
SX-NA772 Front speakers
SX-R275 Surround speakers
SX-C605 Center speaker
Remote controi AM antenna FM antenna
Operating instructions, etc
POSITIONING THE SPEAKERS
To achieve the optimum effects obtainabie with the DOLBY PRO
LOGiC system, it is important to position the speakers properly.
Refer to the fqllowing illustration to find out the best iocation in
your room.
® Front speakers
(D Center speaker
Position in the center of the two front speakers. In addition,
position on or beiow the TV set, if connecting a TV set to the
unit.
(D Surround speakers
Piace the surround speakers directly to the side of or slightly
behind the listening area. Aiign them horizontaily, about 1
meter (3.2 feet) above ear height.
' No sound is heard from the center and surround speakers when
the DOLBY PRO LOGiC and the SURROUND system are set
to off.
' The center speaker sounds when the DOLBY PRO LOGiC is
set to on.
CONNECTIONS
Before connecting the AC cord
The rated voitage of your unit shown on the rear panei is
120 V AC. Check that the rated voltage matches your local
voltage.
IMPORTANT
Connect the speakers, antennas, and all optional equipment first.
Then connect the AC cord.
There are no differences between the front speakers. Both
speakers can be connected as L (ieft) or R (right).
4
ENGLISH