Aiwa NSX-MT725 - Manual (Page 16)

MEMORIZING THE NEW EQUALIZATION
CURVES
DSPSURROUN
I
1,2,4
1,3
1
Up to 5 customized equalization curves can be stored as the
manual modes Ml - M5.
1 Go through steps 1-4 on previous page.
The created curve is displayed for 8 seconds.
2 Within 8 seconds, press ENTER.
“M 1” flashes on the display for 8 seconds.
i‘:T
............
• If this step is not completed within 8 seconds, press
GEQ
first to display “GEQ ON”. Then within 4 seconds press
ENTER
repeatedly until “Ml” flashes.
3 Within 8 seconds, turn MULTI JOG to select one
of the manual modes Ml - M5 to store the curve.
4 Within 8 seconds, press ENTER.
The new equalization curve is stored.
To select the stored equalization curve
Press
GEQ,
and turn
MULTI JOG
to select one of the manual
modes Ml - M5 within 4 seconds.
To adjust the volume of the surround speakers
Press
MANUAL SELECT
twice on the remote control while DSP
SURROUND mode is on.
“SUR” is displayed for 4 seconds. Press ◄ ◄
DOWN
or ► ►
UP
on the remote control within these 4 seconds.
• The DOLBY PRO LOGIC (page 26) surround speakers level is
also changed.
The SURROUND mode is canceled when:
- the ECHO level is changed.
- the DOLBY PRO LOGIC is turned on.
- the headphones are plugged in.
The DSP (Digital Signal Processor) SURROUND adjusts the
delay time, the input mode and the feedback level to give a
resonant surround sound, allowing you to enjoy the real sound
presence of different environments.
This unit has been programmed with 5 different SURROUND
modes.
SELECTING A PROGRAMMED DSP
SURROUND MODE
SURROUND
MULTI
JOG
SURROUND
Five modes of DSP SURROUND offer the sound presence you’d
experience in disco (DISCO), at a live concert (LIVE), stadium
(STADIUM), in a concert hall (HALL) or movie theater (MOVIE).
(Shown in parentheses are indications appearing in the display.)
Press SURROUND, and turn MULTI JOG or press
◄◄ or ►► repeatedly to select the desired
programmed mode within 4 seconds.
i
t DISCO I -
/
“DSP SURROUND” appears and the DSP SURROUND mode is
displayed cyclically as follows.
DISCO-^ LIVE-H—STADIUM^^HALL-^ MOVIE-
Equalization curves are selected automatically to match the DSP
SURROUND modes and can also be manually selected or turned
off to suit your preference.
To display the current DSP SURROUND mode
Press
SURROUND.
The current mode is displayed for 4 seconds.
To cancel the selected mode
Press
SURROUND
twice. “DSP OFF” appears and “DSP
SURROUND” disappears.
When the music source Is monaural
Select “LIVE”, “STADIUM” or “MOVIE” to obtain a simulated stereo
effect.
When “DISCO” or “HALL’ is selected, no sound will be heard
from the surround speakers.
16
ENGLISH