Aiwa NSX-V2100 - Manual (Page 8)

CD PLAYING
BASIC OPERATIONS
■DISC CHANGE
■AOPEN/CLOSE
LOADING DISCS
Press the CD button, then press the ± OPEN/
CLOSE button to open the disc compartment. Load
disc(s) with the iabei side up.
To play one or two discs, place the discs on tray 1 and 2.
To play three discs, press the DISC CHANGE button to rotate
the trays after placing two discs. Place the third disc on tray 3.
Close the disc compartment by pressing the ^ OPEN/CLOSE
button.
©
PLAYING DISCS
■ EDIT/CHECK
OOO
ooo
ooo
oo
<31^00
ooo
ooo
RANDOM/
REPEAT
SHIFT
To play all discs in the disc compartment, press
the ^ button.
Play begins with the disc on tray 1.
Elapsed playing time
stOCK POP JAZZ
a ; edit
cn 3
4 m
fiS 7 9 10
ii!i? 13 14 15
ie\
Number of track
being played
To play one disc oniy, press one of the DISC DIRECT
PLAY buttons.
The selected disc is played once.
To stop play, press the ■ button.
To pause play, press the II button. To resume play, press again.
To search for a particular point during playback, keep the
M M or ►► button pressed and release the button at the desired
point. I
To skip to the beginning of a track during playback, press
the ◄◄:or ►► button repeatedly.
To remove discs, press the À OPEN/CLOSE button.
To start play when the power is off (Direct Play Function)
Press thè CD button or one of the DISC DIRECT PLAY buttons.
The power is turned on and play of the loaded disc(s) begins.
To replade discs before play, press the ^ OPEN/CLOSE button
to open the disc compartment.
To check the remaining time
Press the EDIT/CHECK button on the remote control during play.
The amount of time remaining until all tracks finish playing is
displayed. To restore the play time display, repeat the above
again.
Selecting a track with the remote control
1 Press one of the DISC DIRECT PLAY buttons to select a
disc.
2 PressThe numeric buttons and the +10 button to select a
track.
Example;
To seibct the 25th track, press the +10, +10 and 5 buttons.
To seibct the 10th track, press the +10 and 0 buttons.
The selected track starts to play and continues to the end of
that disc.
Replacifig discs during play
While onè disc is playing, the other discs can be replaced without
interrupting play.
1 Pressithe DISC CHANGE button.
2 Remove the discs and replace with other discs.
3 Press the ± CPEN/CLOSE button to close the disc
compartment.
■ When loading an 8-cm (3-inch) disc, put it onto the inner circle
of the tray.
' Do not place more than one compact disc on one disc tray.
' Do not tilt the unit with discs loaded. Doing so may cause
malfunctions.
Load discs.
7
ENGLISH