Basic operations, Basic recording, Usable tapes – Aiwa NSX-V2100 User Manual
Page 10: 1 press the tape button, Push the cassette hoider to close it, 3 press the ^ button to start piayback, To stop playback, To pause, To fast forward or rewind, Preparation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TAPE PLAYBACK
RECORDING
BASIC OPERATIONS
BASIC RECORDING
Usable tapes
Use only normal (type I) tapes.
1 Press the TAPE button.
2 Press the ■/£ button to open the cassette holder
and insert a tape exposed side down.
Push the cassette hoider to close it.
3 Press the ^ button to start piayback.
Only the side facing you can be played back.
To stop playback
Press the M / ± button.
To pause
Press the II button.
To resume play, press it again.
To fast forward or rewind
In the stop mode, press the ◄◄ or ►► button, and then press
the M / ± button to stop winding.
When both deck 1 and deck 2 are set in the piayback
mode
Deck 2 is heard.
Preparation
• Wind up the tape to the point recording starts.
• Note that recording is done on only one side of the tape.
• Use only normal (type I) tapes.
1 Insert the tape to be recorded on into deck 1 and
push the cassette holder to close it.
2 Get ready for the source to be recorded.
To record from a CD
Press the CD button and load a disc.
To record from a tape
Press the TAPE button. Then, insert the original tape into
deck 2 and play it.
To record from a radio broadcast
Press the TUNER/BAND button and tune in to a station.
To record from the connected source
Press the VIDEO/AUX button and play it.
3 Press the # button to start recording.
The ► button is depressed simultaneously.
When recording from a CD. playing and recording start
simultaneously from the first track.
To stop recording
Press the M / ± button on deck 1.
To pause recording
Press the II button on deck 1.
To resume recording, press it again.
To record selected tracks of the CD
Before pressing the • button, program the tracks (see page 8).
To start recording preciseiy (except when recording from
a CD)
Before pressing the # button at step 3, press the II button on
deck 1. Then, press the
9
button. The deck enters recording
pause mode. When you wish to start recording, press the II
button again.
To record part of the CD
When the
9
button is pressed, recording always starts from the
first track. To start in the middle of a track, play the CD first and
press the II button for CD at the point you wish to start recording
from. Then, press the
9
button. The pause mode for CD button
is released automatically and recording starts.
Do not press the buttons on deck 2 during recording.
9
ENGLISH