Adjusting the sound, Volume control, Super t-bass system – Aiwa NSX-V2100 User Manual
Page 6: Graphic equalizer, Press one of the geq buttons, To cancel the selected mode, To select with the remote control, Sound adjustment during recording, Using the headphones
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ADJUSTING THE SOUND
VOLUME CONTROL
Turn the VOLUME control on the main unit, or press the
VOLUME buttons on the remote control.
SUPER T-BASS SYSTEM
The T-BASS system enhances the realism of low-frequency
sound.
Press the T-BASS button.
Each time it is pressed, the level changes. Select one of the
three levels, or the off position to suit your preference.
GRAPHIC EQUALIZER
This unit provides the following three different equalization
curves.
ROCK: Powerful sound emphasizing treble and bass
POP: More presence in the vocals and midrange
JAZZ: Accented lower frequencies for jazz-type music.
Press one of the GEQ buttons.
To cancel the selected mode
Press the selected button again. “EQ oFF” is displayed.
To select with the remote control
Press the GEQ button repeatedly while pressing the SHIFT
button.The GEQ mode is displayed cyclically as follows.
r
ROCK
POP-
JAZZ
EQoFF —I
(cancel) I
W+1->+2-»-i-3-^oFF (cancel)
D
HOCK POP .lAJiP
_________________
T-3ASS
7/
I....I '
To select with the remote control
Press the T-BASS button while pressing the SHIFT button.
Low frequency sound may be distorted when the T-BASS system
is used for a disc or tape in which low frequency sound is originally
emphasized. In this case, cancel the T-BASS system.
Sound adjustment during recording
The output volume and tone of the speakers or headphones
may be freely varied without affecting the level of the recording.
Using the headphones
Connect headphones to the PHONES jack with a stereo standard
plug (
06.3
mm, ' k inch).
No sound is output from the speakers while the headphones are
plugged in.
ENGLISH