Setting the timer, Preparation, To check the specified time and source – Aiwa NSX-AV800 User Manual

Page 22: Timer recording, To cancei timer standby mode temporariiy, Using the unit whiie the timer is set, Setting the timer 1,2

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SETTING THE TIMER

1,2

The unit can be turned on at a specified time every day with the

built-in timer.

Preparation
Make sure the clock is set correctly. (See page 6.)

Press the TIMER button on the remote control

once to display 0, and press the II SET button

within 4 seconds.
© is displayed, and the hour flashes.

A.,

If you do not press the 11 SET button within 4 seconds, another

operation may start.

Designate the hour of the timer-on time by
pressing

the

DOWN

button,

and

the 11 SET button. Repeat to designate the minute
of the timer-on time.

After you designate the timer-on time, TIMER and one of the

source name flashes alternately on the display for 4 seconds.

Within 4 seconds, press one of the function

buttons to select a source.

“TIMER” and the selected source name flash alternately for 4

seconds. At this time, the selected function button does not

light up.

• If this step is not completed within 4 seconds, repeat from

step 1.

• If the TUNER button is pressed, the band cannot be selected

in this step.

Within 4 seconds, select the duration for the

timer-activated period with the DOWN or

UP button.

The duration for the timer-activated period can be set between

10 and 240 minutes in 10-minute steps.

• If this step is not completeid within 4 seconds, repeat from

step 1.

Prepare the source.

To listen to a CD,

load the disc to be played first on tray 1.

To listen to a tape,

insert the tape into deck 1 or 2.

To listen to the radio,

tune in to a station.

Press the POWER button to turn the unit off after

adjusting the volume and tone.
0 remains on the display after the power is turned off (timer
standby mode).

When the timer-on time is reached, the unit turns on and
begins play with the selected source.

To check the specified time and source

Press the TIMER button on the remote control. The timer-on

time and the selected source name are displayed for 4 seconds.

However, the duration for the timer-activated period will not be

displayed.

TIMER RECORDING

Timer recording is applicable for TUNER and VIDEO/AUX (with

an external timer) sources only.

Press the TIMER button twice on the remote controi so that

i) appears on the dispiay, and press the

SET button within

seconds.

Repeat the steps shown above from step 2 and

insert the tape to be recorded into deck 2 after step 5.

To cancei timer standby mode temporariiy

©.

Using the unit whiie the timer is set

You can use the unit normally after setting the timer.

Before turning off the power, repeat step 5 to prepare the source,

and adjust the volume and tone.

' Timer playback and timer recording will not begin unless the

power is turned off.

■ Connected equipment cannot be turned on and off by the built-

in timer of fhis unit. Use an external timer.

ENGLISH