Playing discs, Loading discs, To check the remaining time – Aiwa NSX-AV800 User Manual
Page 12: Selecting a track with the remote control, Basic operations, Playing discs loading discs
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BASIC OPERATIONS
PLAYING DISCS
LOADING DISCS
DISC CHANGE
Press the CD button, then press the ^ OPEN/CLOSE
button to open the disc compartment. Load disc(s)
with the labei side up.
To play one or two discs, place the discs on tray 1 and 2.
To play three discs, press the DISC CHANGE button to rotate
the trays after placing two discs. Piace the third disc on tray 3.
Cióse the disc compartment by pressing the ± OPEN/CLOSE
button.
Tray
DISC CHANGE
Total playing time
Tray number of the
disc to be played
Total number of tracks
RANDOM
REPEAT
0-9,+10
Load discs.
To piay all discs in the disc compartment, press the
◄ ► button.
Play begins with the disc on tray 1.
Elapsed playing time
r'
' 6^7 8 9 10
1112 131415|
'
Number of track
being played
To play one disc only, press one of the DISC DIRECT
PLAY buttons.
The selected disc is played once.
To stop play, press the ■ button.
To pause play, press the II button.To resume play, press again.
To search for a particular point during playback, keep the
◄◄ or ►► button pressed and release the button at the desired
point.
To skip to the beginning of a track during playback, press
the ◄◄ or ►► button repeatedly.
To remove discs, press the ^ OPEN/CLOSE button.
To start play when the power is off (Direct Play Function)
Press the CD button. The power Is turned on and play of the
loaded disc(s) begins.
To replace discs before play, press the ± OPEN/CLOSE button
to open the disc compartment.
To check the remaining time
Press the CD EDIT/CHECK button during play. The amount of
time remaining until all traoks finish playing is displayed. To
restore the play time display, repeat the above again.
Selecting a track with the remote control
1 Press one of the DISC DIRECT PLAY buttons to select a disc.
2 Press the numeric buttons and the +10 button to select a
track.
Example:
To select the 25th track, press the +10, +10 and 5 buttons.
To select the 10th track, press the +10 and 0 buttons.
The selected track starts to play and continues to the end of
that disc.
11
ENGLISH