SINGER 610U - Manual (Page 18)

SPECIAL DISCS (Continued)
The interchangeable Special Discs that come with your
machine can be used to produce still other stitch patterns.
To Change Special Disc
1. Raise needle to its highest point.
2. Push disc follower releasing lever to the right and
set buttonhole stitch selecting dial to “OFF”.
3. Raise top cover lid, remove buttonhole cam and put
another disc you desire on holder; push down until
disc snaps in place.
Special Disc Patterns
® ®
r
¥
ww ®
IUI|liyi yyuyuu /
COMBINATION PATTERNS
• Upper Stitch Pattern Selector: J, K, L, M, Special
• Lower Stitch Pattern Selector : D through H
• Stitch Width Selector: 2 through 4
• Throat Plate : General Purpose
• Presser Foot: Special Purpose
You can combine two patterns either by using two
built-in discs or by using one Special and one built-in
disc.
If you choose a setting of J, K, L, M and Special on
the upper row, and another D through H on the lower
row, you will be combining the patterns of two discs.
Thus you will have an almost infinite variety of com­
bination patterns.
In Combination Patterns, the Stitch Width Selector Varies the Design.
When the lower stitch pattern selector is not on A, B or C, the stitch width selector no longer controls
width.
Example of Combination Pattern Varied by Stitch Width Selector
J L N
Special
8 4 1 2 3 4 5 3 4
JG2 JG3 JG4
16