Ools required for assembly, To remove brushwacker from carton, Hardware contents – Sears 358.79828 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HARDWARE CONTENTS
Hardware shown full size
(4) Screws
(2) Lock
Washers
(2) Nuts
(2) Mounting
Screws
Parts bag contents not shown full size
Blade Nut/
Spark Plug
Wrench
Locking Pin
Hex Key
Spark
Arrestor Screen
Carburetor
Screwdriver
Parts packed separately in carton
Shoulder Harness
3.2 02. Oil
EumMur
erBiotoNe
«rnuiMmo
I HratwmtiMLu»
rZL'-J«
Operator’s Manual
Metal Blade Shield
Line Limiter
Plastic Line Trimmer Shield
with Line Limiter Hardware
X
Brush Tri-Blade
Shield Support
Plate
Dual Une Cutting Head
Handlebar
Sapling Saw Blade
Blade Transport/
Storage Cover
OOLS REQUIRED FOR ASSEMBLY
Torque Wrench—reference torque values are provided
throughout this manual for tightening hardware.
Phillips Screwdriver
8 mm Wrertch
Provided with your Brushwacker:
Hex Key
Blade Nut/Spark Plug Wrench
Locking Pin
TO REMOVE BRUSHWACKER FROM
CARTON
• Remove loose parts included with Brushwacker.
Remove the loose plastic parts bag from the carton.
• Remove all packing material.
• Check carton thoroughly for additional loose parts.
■ 5 -