Maintenance schedule, General recommendations, Clean unit and labels – Sears 358.79828 User Manual

Page 20: Before each use, Check for damaged/worn parts, Lubrication chart (fig. 28), Warning, Customer responsîbilïtîes

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CUSTOMER RESPONSÎBILÏTÎES

MAINTENANCE SCHEDULE

nil in dates as you complete regular service

Before

Use

After

Use

Every
5hrs.

Every

10 hrs.

Every

25 hrs.

Every

Season

Service Dates

Clean unit and labels.

Check for damaged or worn parts.

Check for loose fasteners and oarts.

1^,

Clean Air Filter

Replace Spark Plua

Inspect Muffler (Seivice if necessary)

■

Ciean^eplace Spark Amestor Screen (If installed)

Check Gearbox Lube

GENERAL RECOMMENDATIONS

The wairanty on this unit does not cover items that have
been subjected to operator abuse or negligence. To

receive full value from the w^ranty, thjB operator must

maintain unit as instructed in this manual.

Some adjustments will need to be made periodically to

pfOperiy maintain your unit.

AH adjustments in the “Service and Adjustments" section

of this manual should be checked at least once each

season.

•

• Once a year, replace the spark plug, replace airfilter eie-

mentand check blades for wear. A new sparkplug and a

clean/new air filter element assures proper air-fuel mix
ture and helps your engine run better and last longer.

• Follow the maintenance schedule In this manual.

CLEAN UNIT AND LABELS

• Clean the unit using a damp cloth with a miid detergent
• Wipe off the unit with a clean dry doth.

BEFORE EACH USE

CHECK FOR DAMAGED/WORN PARTS

• Blades - replace blades that are bent, warped, cracked,

or damaged in any way.

• Dual line head - replace trimmer head parts that are

bent, warped, cracked, or damaged in any way.

• Fuel cap - replace bnDken or leaking fUei cap.

• Gearbox - replace a cracked gearbox-
• Shields - replace shields that are berit, warped, cradled,

or damaged in any way.

LUBRICATION CHART (Fig. 28)

WARNING

DISCONNECT THE SPARK PLUG BEFORE
PERFORMING

MAINTENANCE

EXCEPT

FOR CARBURETOR ADJUSTMENTS.

REPLACE BLADE OR DUAL LINE HEAD
PARTS THAT ARE CRACKED, CHIPPED, OR
DAMAGED IN ANY OTHER WAY BEFORE
USING THE UNIT.

INSPECT

THE

ENTIRE

UNIT.

REPLACE

DAMAGED

PARTS.

CHECK

FOR

FUEL

LEAKS AND MAKE SURE ALL FASTENERS
ARE IN PLACE AND SECURELY FASTENED.

Genera! purpose lithium base gear grease.

- 2 0 -