Sears 113.22643 User Manual

Page 20

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

6. Test beit tension by piacirvg fingers on either side of

belt and squeeze. There should be about a 1/4" give
to the belt.

NOTE: Excessive tightness on pulley belt may cause
increased noise and over load motor. Excessive loose

ness on pulley belt may cause beit to fail prematurely.

INSTALLING PULLEY COVER

edges of pulley housing.

2. Using a philiips screwdriver, reinstall and tighten the

fiat head screw.