Sears 113.22643 User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

4:V-:-"-

TENSION

LEVER

AUXILiARY

MOUNTING HOLE

WORK SUPPORT

HEX SCREW

BELT

BED

TRACKING

KNOB

BED LOCKING

HEX SOCKET

HEAD SCREW

ON-OFF

SWITCH

MOUNTING

HOLE

WARNING: To avoid Injury from accidental start,

turn switch “OFF” and remove plug from power

source outlet before making any adjustments.

1. Work Support. Supports the workpiece o n the sand

ing belt.

2. Hex Socket Head Screw. Loosening screw allows

belt bed to be raised to the vertical position.

3. Tracking Knob. Turning knob counterclockwise

causes sanding belt to move towards the disc; tu ming
knob clockwise causes sanding belt to move away

from the disc.

4. Tension Lever. Sliding levertothe right releases the

sanding belt tension; sliding lever to the left applies
belt tension.

5. Table Lock Knob. Loosening knob allows the work

table to be tilted for bevel sanding. (Scale pointer on
table tnjnnion; scale attached to base.)

6. Auxiliary Mounting Hole. Allows table assembly to

be mounted for end sanding when the bed is placed

in vertical position.

7. On-Off Switch.