Sears 113.22643 - Manual (Page 13)

ON-OFF SWITCH
The On-Off switch has a locking feature. THIS FEA­
TURE IS INTENDED TO HELP PREVENT UNAUTHOR­
IZED AND POSSIBLY HAZARDOUS USE BY CHIL­
DREN AND OTHERS.
1. To turn machine “ON” insert key into switch.
NOTE: Key is made of yellow plastic, located in loose
parts bag.
2. Insert finger under switch lever and PULL end of
switch out.
3. To turn machine “OFF” .. PUSH lever in.
NEVER LEAVE THE MACHINE U N ATTENDED UNTIL
IT HAS COME TO A COMPLETE STOP.
4.To lock switch in OFF position ... hold switch IN with
one hand .. . REMOVE key with other hand.
WARNING: For your own safety, always lock the
switch “OFF” when machine is not in use... remove
key and keep it in a safe place... also... in the event
of a power failure (all of your lights go out) turn
switch off... remove the key and store it remote from
belt and disc sander.