Sears 113.21308 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Insert KEY into switch.
NOTE; Key is made of yellow plastic.
To turn drill ON . . .
Insert finger under switch lever and pull.
To turn drill OFF . . . Push lever in.
In an emergency; . . . the drill bit BINDS . . . STALLS
. . . STOPS ... or tends to tear the workpiece loose
. . . you can QUICKLY turn the drill OFF by hitting the
switch with the palm of your hand.
To lock switch in OFF position . . . hold switch IN with
one hand .. . REMOVE key with other hand,
WARNING: FOR YOUR OWN SAFETY, ALWAYS
LOCK THE SWITCH “OFF” WHEN DRILL PRESS IS
NOT IN USE . . . REMOVE KEY AND KEEP IT IN A
SAFE PLACE . . . ALSO . . . IN THE EVENT OF A
POWER FAILURE (ALL OF YOUR LIGHTS GO OUT)
OR
BLOWN
FUSE
OR
TRIPPED
CIRCUIT
BREAKER, TURN SWITCH OFF . . • LOCK IT AND
REMOVE THE KEY. THIS WILL PREVENT THE
DRILL PRESS FROM STARTING UP AGAIN WHEN
THE POWER COMES BACK ON.
17