Flex FLC Coping - Manual (Page 26)

FLEXCAP FLC WELDED RADIUS COPING
TAPERED VERSION
IMPORTANT!!!
MUST INDICATE PROPER RADIUS CONDITION BY
CIRCLING APPROPRIATE OUTSIDE FACE
PROVIDING A RADIUS
THE RADIUS MAY BE PROVIDED
IN ONE OF TWO METHODS:
1.) THE ACTUAL KNOWN RADIUS IS
OUTSIDE
FACE
ROOF LINE
OR
2.) FIELD CONDITION MEASUREMENTS
NOTE: REFER TO ATTACHED WORKSHEET
RADIUS
(PROVIDED BY APPROVER
PER DETAIL A)
TOP
VIEW
WELDED -
1 3/8"
(35 mm)
MIDPOINT OF
STRAIGHT EDGE
INSIDE
FACE
MIN. 2 1/4" (57 mm)
MAX. 6" (152 mm)
#9 X 1 1/2" (38 mm)
STAINLESS STEEL
FASTENERS (PROVIDED)
MIN. 3" (76 mm)
MAX. 6" (152 mm)
(914 mm)
LENGTH OF
STRAIGHT EDGE
NOTE: CHECK MEASUREMENTS ALONG ENTIRE RADIUS.
DETAIL A
J^"(10mm) SPACE-
PROVIDED FOR
WALL VARIATION WALL
SIZE
Fabrication will proceed only after receipt of
signed print approval.
Print Approval:
Architect and/or contractor shall verify all
dimensions, sizes and quantities. All
products to be installed in strict accordance
with Flex's printed instructions.
Approved by:
Date: _____
_ -- Concealed splice plates are provided with factory
“ applied dual non-curing sealant strips.
MATERIALS:
Top - .080" (2.03 mm) Alum.
Sides - .063" (1.60 mm) Alum.
Color:_________________________
Finish:________________________
QUANTITIES:
Lineal Feet 4-0" (1.22 m) Lengths
PROJECT:
ARCHITECT:
ROOFING CONTRACTOR:
REPRESENTATIVE/DISTRIBUTOR:
Customer Service:
Phone: 800-969^0108
Fax:610-916-9501
DATE: 12/13/10
DRN BY: JJC
CKD BY: SAK
SHTJ OF
DWG# 28011-3478
c
print approval
96
p: 800-969-0108
f: 610-916-9501