Flex FLC Coping - Manual (Page 18)

OUTSIDE "T" COPING MITERS
RIGHT OUTSIDE "T" MITER
OUTSIDE FACE
SPECIFY
WALL SIZE
SPECIFY inside
WALL SIZE face
OUTSIDE
FACE
LEFT OUTSIDE "T" MITER
OUTSIDE FACE
SPECIFY
WALL SIZE
INSIDE
FACE
SPECIFY
WALL SIZE
SPECIFY
WALL SIZE
INSIDE
FACE
INSIDE
FACE
OUTSIDE
FACE
SPECIFY
WALL SIZE
NOTES:
-- Concealed splice plates are provided with factory
applied dual non-curing sealant strips.
- Unless otherwise noted, fabrication of miters and accessories are
furnished standard utilizing a non-penetrating quicklock joint,
then factory sealed watertight.
Fabrication will proceed only after receipt of
signed print approval.
Print Approval:
Architect and/or contractor shall verify all
dimensions, sizes and quantities. All
products to be installed in strict accordance
with Flex's printed instructions.
Approved by: _____________________________
Date: _____________________
- Welded Miters and Accessories
Check one □ Required (surcharge) □ Not applicable
MATERIAL:
_ 24 Ga. (.65 mm) Steel
__ .040" (1.01 mm) Alum. Color:
_.050" (1.27 mm) Alum.
__ .063" (1.60 mm) Alum. Finish:
Other
QUANTITIES:
Right Outside "T" Miter(s)
Left Outside "T" Miter(s)
PROJECT:
ARCHITECT:
ROOFING CONTRACTOR:
REPRESENTATIVE/DISTRIBUTOR:
Customer Service:
Phone: 800-969-0108
Fax:610-916-9501
DATE: 12/13/10
DRN BY: JJC
CKD BY: SAK
SHT# OF
DWG# 28011-3473
c
print approval
88
p: 800-969-0108
f: 610-916-9501