Dual-purpose ports, Console port – Cisco 3560 User Manual

Page 95

B-3

Catalyst 3560 Switch Hardware Installation Guide

OL-6337-07

Appendix B Connector and Cable Specifications

Connector Specifications

Figure B-4

Copper SFP Module RJ-45 Connector

Dual-Purpose Ports

The Ethernet port on a dual-purpose port uses standard RJ-45 connectors.

Figure B-5

shows the pinouts.

Figure B-5

10/100/1000 Port Pinouts

The SFP module slot on a dual-purpose port uses SFP modules for fiber-optic and copper uplink ports.
See the Catalyst 3560 release notes for a list of supported SFP modules.

Note

The auto-MDIX feature is enabled by default. For configuration information for this feature, see the
switch software configuration guide or the switch command reference.

Console Port

The console port uses an 8-pin RJ-45 connector, described in

Table B-2

and

Table B-3

. The

RJ-45-to-DB-9 adapter cable connects the console port of the switch to a console PC. You need an
RJ-45-to-DB-25 female DTE adapter (ACS-DSBUASYN=) to connect the switch console port to a
terminal. For console port and adapter pinout information, see

Table B-2

and

Table B-3

60915

2 3

4 5 6 7 8

Pin

Label

TP0+

TP0-

TP1+

TP2+

TP2-

TP1-

TP3+

TP3-