Cisco 3560 - Manual (Page 33)

C H A P T E R
2-1
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
2
Switch Installation (24- and 48-Port Switches)
This chapter describes how to install the Catalyst 3560 24- and 48-port switches, including how to
interpret the power-on self-test (POST) that ensures proper operation. It also describes how to make
connections to the switch.
For installation information for the Catalyst 3560-8PC and Catalyst 3560 12-PC-S switches, see
Chapter 3, “Switch Installation (8- and 12-Port Switches).”
The instructions in this chapter for connecting to the switch ports and for installing, and connecting to
the SFP modules apply to all Catalyst 3560 switches.
Read the topics and perform the procedures in this order:
• Preparing for Installation, page 2-1
• Verifying Switch Operation, page 2-6
• Installing the Switch, page 2-7
• Installing and Removing SFP Modules, page 2-15
• Inserting and Removing the SFP Module Patch Cable, page 2-18
• 10/100 or 10/100/1000 Ports, page 2-19
• Connecting the Switch to Compatible Devices, page 2-20
• Where to Go Next, page 2-24
Preparing for Installation
• Warnings, page 2-2
• Installation Guidelines, page 2-5
• Box Contents, page 2-6
• Tools and Equipment, page 2-6