Attaching the cable guide, After the switch is mounted in the rack, Connect to the front-panel ports – Cisco 3560 User Manual
Page 43: 1cable guide screw, Series, Syst rps stat duplx speed poe
2-11
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Chapter 2 Switch Installation (24- and 48-Port Switches)
Installing the Switch
After the switch is mounted in the rack:
1.
Power on the switch. See the
“Verifying Switch Operation” section on page 2-6
2.
Connect to a 10/100 or 10/100/1000 port, and run Express Setup. See the Catalyst 3560 Switch
Getting Started Guide for instructions. To use the CLI setup program, see
“Configuring the Switch with the CLI-Based Setup Program.”
3.
Connect to the front-panel ports.
Attaching the Cable Guide
We recommend that you attach the cable guide to prevent the cables from obscuring the front panel of
the switch and the other devices installed in the rack. Use the supplied black screw shown in
to attach the cable guide to the left or right bracket.
Figure 2-9
Attaching the Cable Guide on the Catalyst 3560 Switch
1
Cable guide screw
Catalyst 3560
SERIES
PoE-48
SYST
RPS
STAT
DUPLX
SPEED
PoE
MODE
1
2
3
4
1
2
5
6
7
8
9
10
11
12
13
14
15
16
3
4
1X
2X
15X
16X
17
18
21
22
23
24
25
26
27
28
29
30
31
32
19
20
17X
18X
31X
32X
33
34
37
38
39
40
41
42
43
44
45
46
47
48
35
36
33X
34X
47X
48X
1
97924