Leds, System led – Cisco 3560 User Manual
Page 21
1-11
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Chapter 1 Product Overview
Front Panel Description
LEDs
You can use the switch LEDs to monitor switch activity and its performance.
shows the
switch LEDs and the Mode button that you use to select one of the port modes.
All the LEDs described here are visible in the embedded device manager and Network Assistant GUIs.
The switch online help describes how to use the device manager or Network Assistant to configure and
monitor individual switches and switch clusters.
Figure 1-12
Catalyst 3560 Switch LEDs
System LED
For information on the System LED colors during the power-on self-test (POST), see the
Switch Operation” section on page 2-6
1
Mode button
5
Status LED
2
PoE LED
1
1.
The PoE LED is only on the Catalyst 3560 PoE switches.
6
RPS LED
2
2.
The Catalyst 3560-8PC and the Catalyst 3560-12PC-S switches do not have an RPS LED.
3
Speed LED
7
System LED
4
Duplex LED
8
Port LEDs
Table 1-2
System LED
Color
System Status
Off
System is not powered on.
Green
System is operating normally.
Amber
System is receiving power but is not functioning properly.
1X
2X
11X
12X
1
2
3
4
5
6
7
8
9
10
11
12
SYST
RPS
STAT
DUPLX
SPEED
PoE
MODE
8
2
3
4
5
6
7
1
97913