Triner Scale TMU-295 - Manual (Page 67)

Commands 5-27
[Description] Turns upside-down printing mode on or off.
• When the LSB of n is 0, upside-down printing mode is turned off.
• When the LSB of n is 1, upside-down printing mode is turned on.
[Notes] • In upside-down printing mode, the printer rotates the line to be
printed by 180° and then prints it.
• In page mode, only setting is effective.
• This command is enabled only when input at the beginning of a
line.
[Default] n = 0
[Example]
GS I n
[Name] Transmit printer ID
[Format] ASCII GS I n
Hex 1D 49 n
Decimal 29 73 n
[Range] 1
≤
n
≤
3, 49
≤
n
≤
51
[Function] Transmits the printer ID specified by n as follows:
n = 2, Type ID
n Printer ID Specification ID (hexadecimal)
1, 49 Printer model ID TM-295 02H
2, 50 Type ID See table below.
3, 51 ROM version ID Depends on ROM version
Bit Off/On Hex Decimal Function
0 Off 00 0 Not used. Fixed to Off.
1 Off 00 0 Not used. Fixed to Off.
2
Off 00 0 Undefined.
On 04 4 Undefined.
Upside-down printing mode is turned off: Upside-down printing mode is turned on:
Paper feed direction
A B C D E F G
0 1 2 3 4 5 6
0 1 2 3 4 5 6
A B C D E F G