Triner Scale TMU-295 - Manual (Page 33)

Reference Information 4-1
Chapter 4
Reference Information
Printing Specifications
Character Specifications
Printing Method: Impact dot matrix
Head Wires 7-pin shuttle type
Printing Direction: Unidirectional
Lines per second 5 x 7 font: 1.9 to 2.3
7 x 7 font: 1.9 to 2.3
Characters per line 5 x 7 font: 35
7 x 7 font : 42
Characters per inch: 5 x 7 font: ANK: 0.63
Graphics: 0.315
7 x 7 font: ANK: 0.63
Graphics: 0.315
Paper feed speed: Approximately 12.5 lines (52.5 mm
(2.10”))/second
(When the ESC d and FF commands are
used.)
Number of
characters Alphanumeric characters: 95
Extended graphics: 128 x 3
International characters: 32