Triner Scale TMU-295 User Manual

Page 51

Commands 5-11

ESC ✽ m nL n H [d]k

[Name]

Select bit-image mode

[Format]

ASCII

ESC

✽

nL nH [d]k

Hex

nL nH [d]k

Decimal

nL nH [d]k

[Range]

m = 0, 1
0

≤

255

≤

255

k = nL + nH x 255

[Description] Selects a bit-image mode using m for the number of dots specified by

nL and nH, as follows:

The number of dots in the horizontal direction depends on the
printing area and the printing direction specified by ESC W and ESC
T.

[Notes]

• The nL and nH indicate the number of dots of the bit image in the

horizontal direction. The number of dots is calculated by nL + nH

256.

• If the bit-image data input exceeds the number of dots to be

printed on a line, the excess data is ignored.

• d indicates the bit-image data. Set a corresponding bit to 1 to print

a dot or to 0 to not print a dot.

• If the values of m and nH are out of the specified range, the

following data is processed as normal data.

• After printing a bit image, the printer returns to normal data

processing mode.

• In page mode, double density bit image data is not available.
• The relationship between the image data and the dots to be

printed is shown on the next page.

Mode

Vertical direction

Horizontal direction

The number
of dots

Dot
density

Maximum
number of dots

8-dot single-density

60 DPI

80 DPI

210

8-dot double-density

60 DPI

160 DPI

420