Triner Scale TMU-295 - Manual (Page 41)

Commands 5-1
Chapter 5
Commands
Command Notation
[Name] The name of the command.
[Format] The code sequence.
ASCII indicates the ASCII equivalents.
Hex indicates the hexadecimal equivalents.
Decimal indicates the decimal equivalents.
[ ]k indicates the contents of the [ ] should be repeated k times.
[Range] Gives the allowable ranges for the arguments.
[Description] Describes the function of the command.
[Notes]
Provides important information on setting and using the printer
command, if necessary.
[Default] Gives the default values, if any, for the command parameters.
[Reference] Lists related commands.
[Example] Provides examples using the command.
The numbers denoted by < >H are hexadecimal.
The numbers denoted by < >B are binary.
The numbers denoted by < > are decimal.
NOTE: The phrase "beginning of a line" in command descriptions assumes
that the following condition has been met:
• Print data, including spaces skipped by HT, is not in the current
print buffer.