Triner Scale TMU-295 User Manual
Page 62
5-22
Commands
Decimal
27
99
53
n
[Range]
0
≤
n
≤
255
[Description] Enables or disables the panel buttons.
• When the LSB of n is 0, the panel buttons are enabled.
• When the LSB of n is 1, the panel buttons are disabled.
[Notes]
• When the panel buttons are disabled, none of them are usable
when the printer cover is closed.
[Default]
n = 0
ESC d n
[Name]
Print and feed n lines
[Format]
ASCII
ESC
d
n
Hex
1B
64
n
Decimal
27
100
n
[Range]
0
≤
n
≤
255
[Description] Prints the data in the print buffer and feeds n lines.
[Notes]
• This command sets the print starting position to the beginning of
the line.
• This command does not affect the line spacing set by ESC 2 or
ESC 3.
[Reference]
ESC 2, ESC 3
ESC e n
[Name]
Print and reverse feed n lines
[Format]
ASCII
ESC e
n
Hex 1B 65 n
Decimal 27
101 n
[Range]
0
≤
n
≤
255
[Description] Prints the data in the print buffer and feeds n lines in the reverse
direction.
[Notes]
• The command is available only in standard mode.
• This command sets the print position to the beginning of the line.
• The setting values do not remain.
ESC f t1 t2
[Name]
Set cut sheet wait time
[Format]
ASCII
ESC
f
t1
t2
Hex
1B
66
t1
t2
Decimal
27
102
t1
t2
[Range]
t1 = 0
0
≤
t2
≤
64