Toa HY-VM7W - Manual (Page 9)

9
Step 2. Mount eyebolts to the T-bracket.
The T-bracket has three M8 eyebolt mounting holes.
Be sure to install the eyebolts in these 3 places.
Note
Eyebolts are not supplied with the bracket. Prepare them separately.
Step 3. Attach the suspension wires to the eyebolts, and suspend the speaker at three points using chains,
anchor shackles, etc.
Select eyebolts, wires, chains and anchor shackles that can
safely support the total weight of the speaker system and the
HY-VM7 bracket.
WArNINg
Wire
Eyebolt Tightening torque: 8 N·m
2
2
2
3
3
3
Step 4. Mount the safety wires.
For the safety wire mounting method, refer to the operating instructions supplied with the HX-7B or
HX-7W speaker.