Toa HY-VM7W - Manual (Page 2)

2
material damage and possible personal injury.
• Tighten each nut and bolt securely. Ensure that
the bracket has no loose joints after installation
to prevent accidents that could result in personal
injury.
• Use the HX-7B or HY-7W Speaker System in
combination. Doing otherwise may cause the
speaker or component to fall off, resulting in
personal injury.
• Do not mount the speaker in locations exposed
to constant vibration. The mounting bracket can
be damaged by excessive vibration, potentially
causing the speaker to fall, which could result in
personal injury.
• Avoid installing the speaker in locations such
as in indoor swimming facilities that are not well
ventilated. In such locations, the bracket may be
vulnerable to corrosion, eventually allowing the
speaker to fall resulting in personal injury.
• Avoid touching the bracket’s sharp metal edge to
prevent injury.
• Do not place heavy objects on the speaker as this
may cause it to fall or break which may result in
personal injury and/or property damage. In addition,
the object itself may fall off and cause injury and/or
damage.
• Do not stand or sit on, nor hang down from the
bracket as this may cause the speaker to fall down
or drop, resulting in personal injury and/or property
damage.
• Have the bracket checked periodically by the shop
from where it was purchased. Failure to do so may
result in corrosion or damage to the bracket that
could cause the speaker to fall, possibly causing
personal injury.
Indicates a potentially hazardous situation which,
if mishandled, could result in moderate or minor
personal injury, and/or property damage.
cAUTION
2. geNerAL DeScrIpTION
The HY-VM7 Series Speaker Rigging Brackets are used to connect the HX-7B or HX-7W Speaker System to
the optional HY-WM7B or HY-WM7W Speaker Wall Mounting Brackets or HY-C0801 or HY-C0801W Speaker
Ceiling Mounting Brackets. It is also possible to suspend the speaker system from the ceiling or mount it to the
ceiling or beams with the use of the HY-VM7 bracket.
3. MOUNTINg THe SpeAker ON A WALL
(using the optional HY-WM7b or HY-WM7W bracket)
Mount the HX-7B or HX-7W Speaker System to the wall by using the HY-VM7 in combination with the optional
HY-WM7B or HY-WM7W bracket.
3.1. Mounting Diagrams
[component disassembly] [completed installation]
HY-WM7B or HY-WM7W
Speaker Wall Mounting Bracket
This bracket (T-bracket)
This bracket (Angle bracket)
HX-7B or HX-7W
This bracket (Mounting base)
Note
Only one HX-7B or HX-7W speaker can be mounted.
Two joined speakers cannot be mounted.