Toa HY-MT7 - Manual

1. SAFETY PRECAUTIONS
• Before installation or use, be sure to carefully read
all the instructions in this section for correct and
safe operation.
• Be sure to follow all the precautionary instructions
in this section, which contain important warnings
and/or cautions regarding safety.
• After reading, keep this manual handy for future
reference.
• Do not use other methods than specified to mount
the adapter. Extreme force is applied to the adapter
and the matching transformer could fall off, possibly
resulting in personal injuries.
• Tighten each nut and bolt securely. Ensure that
the adapter has no loose joints after installation
to prevent accidents that could result in personal
injury.
• Use the specified matching transformer in
combination. Doing otherwise may cause the
adapter or matching transformer to fall off, resulting
in personal injury.
• Avoid installing the speaker in locations close to the
seashore or in indoor swimming facilities that are
not well ventilated. In such locations, the adapter
may be vulnerable to corrosion, eventually allowing
the matching transformer to fall resulting in personal
injury.
Indicates a potentially hazardous situation which,
if mishandled, could result in moderate or minor
personal injury, and/or property damage.
CAUTION
• Avoid touching the adapter’s sharp metal edge to
prevent injury.
• Have the adapter checked periodically by the shop
from where it was purchased. Failure to do so
may result in corrosion or damage to the adapter
that could cause the matching transformer to fall,
possibly causing personal injury.
2. GENERAL DESCRIPTION
The HY-MT7 Matching Transformer Adapter is
designed to mount an optional MT-200 Matching
Transformer* to the HX-7 Series Speaker System.
* The Matching Transformer is used to convert low
impedance to high impedance (100 V or 70 V line).
Refer to the MT-200’s Operating Instructions for
more details.
3. MT-200 MOUNTING ExAMPLE
Note
When joining two speaker systems, a separate MT-
200 Matching Transformer must be attached to the
second speaker system as well. The mounting method
is the same as that for the initial speaker system.
INSTALLATION MANUAL
MATChING TRANSFORMER ADAPTER hY-MT7
Thank you for purchasing TOA’s Matching Transformer Adapter.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
Indicates a potentially hazardous situation which,
if mishandled, could result in death or serious
personal injury.
WARNING
MT-200
HX-7 Series speaker