Pon version – Tii FDH1 User Manual
Page 7
7
Tii Network Technologies Inc. 2012
7. PON Version.
7.1. Figure 4 shows the PON version which is a 1x 32 configuration with 1 X 12 fiber pass through and 4 x
8 LGX (32) modules distribution with an additional 4 X 8 LGX (32) modules for a parking lot. Included
is a 1 x 32 PON splitter.
7.2.
Pigtails from the splitter are routed across the front of the inside door while the distribution fiber are
either splice in the splice trays and connected via factory installed pigtails to the modules or via field
installed mechanical connectors
.
FIGURE 4. PON Version
FIGURE 5. PON Version- Layout with labeling.
Splitter Module Retainer
1 x 12 Feeder fiber module
4 – 1x 8 LGX Distribution Modules
4 – 1 x 8 LGX Splitter Parking Lot
See also other documents in the category Tii Equipment:
- OF025PFNOPNST1 (2 pages)
- IF025PFNOPNST1 (2 pages)
- 210 (2 pages)
- 220 (1 page)
- 231-2 (1 page)
- 68T-2S-4 (1 page)
- 68M-2-1T (1 page)
- 68M-12-1T (1 page)
- 68M-1-1T (1 page)
- 170-06-03 (2 pages)
- 69T (1 page)
- ISB (2 pages)
- ISB-MB (1 page)
- 372S-12LP (1 page)
- 372S-12 (1 page)
- 80-100 (1 page)
- 80-400 (1 page)
- 80-410V-45 (1 page)
- SCT-A (1 page)
- 87 (1 page)
- 95S Series (2 pages)
- 95S Series (3 pages)
- 96-00-1 SERIES (2 pages)
- 96-00-4 SERIES (2 pages)
- 97 (2 pages)
- 97C (1 page)
- 99S SERIES (2 pages)
- 831E (1 page)
- 831W2 (1 page)
- 856E (1 page)
- VIS-4 (2 pages)
- ONT-SS (1 page)
- VIS-2 (2 pages)
- FDT1 Series (2 pages)
- FDT2 Series (2 pages)
- 169F SERIES (2 pages)
- 506F (2 pages)
- 506F-03 (2 pages)
- 506F-02-01-04 (2 pages)
- 506F-01-01-01/-02/-03 (2 pages)
- UVS-12 (1 page)
- 761-4T-12 (2 pages)
- VIS-3 (2 pages)
- FET1 Series (2 pages)