Tii 95S Series User Manual
Tii Equipment

P/N 92217601 • Rev E•
8/27/2008
Warranty: If this unit fails during the warranty period, contact tii customer service to authorize return. Unit may be returned prepaid.
Model 95S Series
ADSL/POTS Splitter Module
Installation Note
Description
1. The TII 95S Series ADSL POTS Splitter
Module maintains a constant direct connection
between customer and central office service
provider. The Splitter Module is equipped with
a customer test jack (See Figure 1). The
customer can insert the RJ-11 plug from a
working telephone into this test jack to assure
a signal is received from the central office.
This is the only time the customer is
disengaged (both DSL and POTS service)
from the central office.
Features
Figure 1
Installation
1. Hold the Splitter Module with the cover pivot
side on right.
2. Lower the pivot side edge inside the
designated installation cavity.
3. Engage the right end ledge under the catch.
(See Figure 2).
4. Push the left side end down until the latch
snaps closed.
Figure 2
141 Rodeo Drive
Edgewood, NY 11717
Toll Free 888.444.4720
www.tiinettech.com