Tii FDH1 User Manual

Page 2

Tii Network Technologies Inc. 2012

Revision History

ISSUE

DATE

REASON FOR CHANGE

3/2012

Original release

TRADEMARK INFORMATION

TII Network Technologies, Tii, Tii (Logo) and Tii Fiber Optics are trademarks.

DISCLAIMER OF LIABILITY

Contents herein are as of the date of publication. Tii Network Technologies Inc. (Tii) reserves the right to
change the contents without prior notice. In no event shall Tii be liable resulting from the loss of data, loss of
use or loss of profits and Tii further disclaims any and all liability for indirect, incidental, special, consequential
or other similar damages. This disclaimer applies to all products, publications, and services during and after
the warranty period.

General Safety Precautions

Warning

– Wet conditions increase the potential for an electric shock when installing or

using electrically power equipment. To prevent shock, never install or use electrical equipment in a
wet location or during a lightning storm.

Danger

– Do not look into the ends of any optical fiber. Exposure to laser radiation may

result. Do not assume the laser power is turned off or that the fiber is disconnected at the other end.

Caution

–

Always follow corporate safety practices when handing, striping and preparing

fiber optic cable, fiber shards can be dangerous if they are not disposed of properly. Always wear
proper safety equipment

– including safety glasses, gloves etc. Refer to corporate standards when in

doubt.