Tii ISB-MB - Manual

P/N 92234901 • Rev A • ECN 10-075 • 5/13/2010
Warranty: If this unit fails during the warranty period, contact tii customer service to authorize return. Unit may be returned prepaid.
Model: ISB-MB
ISB MOUNTING BRACKET
Installation Note
Description
1. This Installation Note covers the description
and installation of the TII ISB Mounting
Bracket. The TII ISB Mounting Bracket will
allow for installation of multiple ISB Plates.
The ISB-MB includes (4) Mounting Brackets
and (4) 10-32 x 1/2” pan head machine
screws.
Features
Figure 1
Installation
1. Locate the ISB PLATE already installed.
2. Loosen the screws holding the ISB Plate
enough to slip the ISB Brackets under the
screw. Slide the open end of the ISB Bracket
under the screw and tighten. (See Figure 1)
3. Add additional ISB Plate on top of ISB
Brackets and tighten with 10-32 screws
provided. (See Figure 1)
4. If additional ISB Plates are to be installed,
repeat the installation procedure.
ISB Plate
(4) ISB Brackets
(4) 10‐32 Screws