Tii 80-200 - Manual

P/N 92223201 • Rev C• 7/8/2008
Warranty: If this unit fails during the warranty period, contact tii customer service to authorize return. Unit may be returned prepaid.
Model 80-100 / 80-200
Indoor DSL Filter / Indoor DSL Filter with
Data Port
Installation Note
Description
1. The tii Series 80-100 and 80-200 are both ADSL low pass
filters. They are passive in-line devices designed to let
through POTS (Plain Old Telephone Service) while
blocking the Asymmetric Digital Subscriber Line (ADSL)
signals.
2. The tii Series 80-200 has a second unfiltered RJ-11 port
for connection to ADSL modems and Home Phone
Network (HPN) services.
Features
Figure 1
Installation
1. Identify the location where the existing phone line is
installed.
2. Disconnect the existing telephone cable from the wall jack
to telephone (See Figure2)
3. Insert the RJ-11 plug of the tii 80-100/80-200 (Line) into
the RJ-11 jack of the wall outlet (Figures 2 and 3).
4. Reconnect the telephone cable from the Telephone
(Input) to the RJ-11 on the tii 80-100/200 (Line). For ADSL
modem connection use 80-200. (Figures 3 and 4)
5. Perform necessary tests to confirm that the computer
communicates with the DSL modem.
Figure 3 TII 80-100 Installation
TII 80-100
/00
Line
Phone
Telephone
Input
Wall Plate
ADSL Modem
Input
Line
ADSL
Modem
Wall Plate
Phone
Telephone
Input
TII 80-200
/00
Figure 4 TII 80-200 Installation
Input
Wall Plate
Disconnect
Telephone
Figure 2 Existing Telephone Connections
Tii 80-200
Tii 80-100