ThermoWorks 9882 PRINTING DATALOGGER THERMOMETER - Manual (Page 15)

AUTOMATIC LOGGING
Press SET to set needed setting first. The Date mode is
based on the mode you set under SET (see page 10). The
sampling rate is from 1 to 7200 seconds. "Expect" means
total memory of this meter, "Remain" means how many
memory left in meter.
Press START to begin the logging function. While logging:
Press VIEW to see the data ( more than one ) in the screen,
or press MEAS to see a real-time data,
or press STOP to quit logging.
Press P-PG or N-PG to review previous or next 100 points.
After stopping, press START to begin again. The sampling rate
and previous record are remained if the previous setting
has not been changed.
"Suspend" is the stop time of each day during setting date.
If you want to record 24 hours a day, you have to set :
00:00:00 as "Start" , and 23:59:59 as "Suspend" .
Definition
F2 F3 F4 F1
Welcome
MEAS MEM LOG SET
F3 :Datalogging
LOG
This is to automatically record what you set up before
measurement with real time, first to set records start/stop
date and time, sample rate , memory points. The screen
content shows Expect memory points and Remain memory
points while in setting.
13