ThermoWorks 9882 PRINTING DATALOGGER THERMOMETER - Manual (Page 12)

LCD Cont.(1-5): LCD brightness. From darkest 1 to brightest 5
Prn Cont. (1-9): Printing darkness. From lightest 1 to heaviest 9
Unit: The unit could be metric or imperial / or
Auto Off: The selectable time frame is 1 to 20 min.
C F
Set Clock: To choose the date mode and set your local time.
Date mode:MM-DD-YY or DD-MM-YY or YY-MM-DD
Set ID: If choose "Disable", the ID will not be printed out.
ID: To edit an ID of this printer , the ID will be printed out at
printing mode.
Descriptions :
Select item: To select which measured parameters need to be
showed on the LCD. The unit of each parameter
could be selected from here as well.
Pressing or key to shift the cursor.
Pressing EDIT to enter modification mode.
Pressing PRN to enter printing mode.
Pressing NEXT/BACK to enter next or previous page.
Pressing EXIT to return to main menu
METER SETTING
Before measuring, please check the meter setting first to confirm
the basic settings of the meter are what you need.
To enter each command, just press the corresponding F1 to F4
key.
F2 F3 F4 F1
Welcome
MEAS MEM LOG SET
SET
F4 :Meter Setting
10