TeeJet BOOMPILOT JOB COMPUTER - Manual (Page 20)

16
www.teejet.com
OVER
VIE
W
SE
TUP
APPENDIX
GE
TTING ST
AR
TED
OPER
ATION
ISOBUS Job Computer : BoomPilot ®
APPENDIX A - FACTORY SETTINGS & RANGES
SETUP
GPS Setup
Description Factory Setting Range/Options User Setting
Overlapping 100% 0%, 50%, 100%
GPS Alarm No GPS Data No GPS Data
No DGPS Data
No GPS Alarms
GPS Input Internal Internal
RS232
Machine Setup
Description Factory Setting Range/Options User Setting
Delay Off 0.0 0.0 - 10.0 sec
Delay On 0.0 0.0 - 10.0 sec
Front or Back Mounted Implement Back Front
Back
Distance from Boom to Mount Point 0.00 0.00 - 50.00 m
Distance from Antenna to Mount
Point
0.00 0.00 - 200.00 m
OEM
Description Factory Setting Range/Options User Setting
Antenna Machine Mounted No Yes
No
Distance from Hitch to Antenna 0.00 0.00 - 500.00 m
USER INTERFACE
Description Factory Setting Range/Options User Setting
Use Perferred VT Off Off
On
Show Number on Soft Key No No
Yes
BoomPilot ECU Number (FI) 1 1 - 9
APPENDIX B - UNIT SPECIFICATIONS
Dimensions 19.05 x 18.42 x 6.03 cm
Weight 0.644kg
Connector 30 position Cinch pins. A1-K3
30 position Cinch pins. L1-Y3
Environmental Operating -40 to +85°C
Humidity 90% non-condensing
Input/Output ISO 11783 (ISOBUS)
Power Requirement <9 watts @12 VDC