TeeJet BOOMPILOT JOB COMPUTER - Manual (Page 10)

6
www.teejet.com
OVER
VIE
W
SE
TUP
APPENDIX
GE
TTING ST
AR
TED
OPER
ATION
ISOBUS Job Computer : BoomPilot ®
Master Screen
The Master Screen gives access to the systems currently available on your VT.
• To view the Master Screen options, select MASTER SCREEN KEY in bottom right corner of any screen.
Figure 3-2: Master Screen
Master Screen Key on Main Setup Screen
Home Screen
The Home Screen gives access to the BoomPilot ECU’s available functions: Operation Mode and Main Setup.
• To view the Home Screen, select HOME KEY in the top right corner of any screen.
Figure 3-3: Home Screen
Home Key on Main Setup Screen
SETUP
Setup configures the GPS settings and Machine settings.
Figure 3-4: Setup
1. From the Main Setup Screen , select SETUP.
2. Select from:
►GPS Setup – used to establish the Overlapping percentage, GPS Alarm and
GPS Input
►Machine Setup – used to establish the delay off and delay on time; front
or back implement mounting position; and distance from the boom and the
antenna to the mounting point