SUUNTO SPYDER User Manual

Page 72

The dive time is displayed in 20 second increments with each display being shown

for about three seconds. The depths shown are the maximum values of each inter-

val.
After the last depth figure of the selected profile ( Fig. 6.8), the Spyder automati-

cally returns to Display I of the same dive in the Logbook. If desired, the profile of

the same dive can be recalled again following the above procedure.
The scrolling of the profile can be stopped by pressing any button.
Press

to stop the scrolling and to return to Display I

of the same dive in the Logbook.

Press

to stop the scrolling and to change to Display I

of the next dive in the Logbook.

Press

to stop the scrolling and to change to Display I

of the previous dive in the Logbook.

Press

to stop the scrolling and to return to the beginning of the Logbook.

Press

two (2) times to exit the Logbook Memory [LOG] and enter the

Memory Mode [MEM].

NOTE: Several repetitive dives are considered to belong to the same repetitive

dive series if the no-flying time has not ended. See Dive Numbering in section

4.4.1 for further information.