SUUNTO SPYDER User Manual

Page 35

Dive Numbering Shown During Dive Planning
Several repetitive dives are considered to belong to the same repetitive dive se-

ries, if the Spyder still has been counting desaturation/no fly time. When the

surface time is less than 10 minutes, the dives are considered to be one and the

same. The dive number will not change for the second part of such a dive and the

dive time will continue, where it left off.
4.2.3 Example Dive - For Easy Learning
To allow you to get acquainted with the features and diplays of the Spyder before

diving, the example dive in figure 4.11 illustrates what the display would look like

during an actual dive.The example dive shows a profile of a normal dive including

no-decompression dive information.
4.2.4 Presetting Displays and Alarms
The Spyder has a very unique (pat. pending) presetting system for the User De-

finable Display Field in the lower part of the display. You are also able to preset

depth and time alarms according to your personal preference.
Presetting the Displays
The displays can be preset in the Surface Mode. If it is not active, enter it by

selecting the Dive Mode.
Preset with the

button in the lower left corner of the display (Fig 4.12):

- the maximum depth or

- the temperature.