SIG SAUER SSG 3000 - Manual (Page 51)

www.sigsauer.com 51
9.3 Fitting the carrying sling
See Figure 17 on page 48.
1. Insert the open sling swivel.
2. Press the knurled knob with the plunger and turn it to the right until the hinged plate snaps onto the stud.
3. Remove the knurled knob from the plunger by turning it to the right.
4. Insert the stud of the front sling swivel also into the front sling swivel bushing 48.
Note:
• Securely tighten the knurled knob on the plunger prior to turning.
• The sling swivel must be aligned exactly 90° to the orientation of the barrel.
519 511 512
14SIG1027_OM-SSG3000-USA_MiniManual_PeaseREV05.indd 51 3/27/14 11:17 AM