SIG SAUER SSG 3000 - Manual (Page 48)

48 www.sigsauer.com
8.2 Removing the carrying sling
1. Unscrew the knurled knob Figure 17/A to the left.
2. Press in the knurled knob with the plunger and twist it by
90° to the left.
3. Remove the sling swivel.
Note:
• Clean and oil the sling swivels regularly.
8.3 Removing the barrel
1. Use the spanner supplied to slacken off the clamping
screws 306, 306a in the sequence centre - rear - front.
2. Completely undo the front clamping screw 306a only.
3. Pull out insert 308 from below.
4. Extract the barrel 400 from the receiver by lightly twisting
it if required.
See Figure 18.
A
Figure 17
14SIG1027_OM-SSG3000-USA_MiniManual_PeaseREV05.indd 48 3/27/14 11:17 AM