SIG SAUER SSG 3000 - Manual (Page 34)

34 www.sigsauer.com
5.6.2 Removing the bolt
1. Move the buttstock cheekpiece down as far as possible or remove it (see section 7.1).
2. Release the Rifle safety (see section 6.1).
3. Open the bolt and draw it back approximately half of its travel.
4. Activate the safety catch (see section 6.2).
5. Rotate the bolt to the left (approx. 90°), until the bolt channel becomes visible in the bolt handle guideway.
6. Extract the bolt to the rear.
1
2
3a
3b
4
6
5
14SIG1027_OM-SSG3000-USA_MiniManual_PeaseREV05.indd 34 3/27/14 11:16 AM