0 stock, 1 removing the cheekpiece – SIG SAUER SSG 3000 User Manual
Page 44
44
www.sigsauer.com
7.0 Stock
The cheekpiece of the SSG3000™ stock is adjustable for
height and can be completely removed. The buttpad can be
adjusted in length.
7.1 Removing the cheekpiece
1. Adjust the cheekrest to its highest position.
2. Locate the one cheekpiece release which has an opening,
and insert the 3mm wrench key, straight in, until it stops.
Both releases are now unlocked.
3. Pull the two releases out of the cheekrest, and then
remove the wrench.
4. Pry one side of the cheekrest away from the stock, and
up, to remove.
Figure 11
Figure 12
14SIG1027_OM-SSG3000-USA_MiniManual_PeaseREV05.indd 44
3/27/14 11:17 AM