Warning, 0 dismantling 8.1 removing the stock – SIG SAUER SSG 3000 User Manual
Page 47
www.sigsauer.com
47
8.0 Dismantling
8.1 Removing the stock
1. Open the bolt and remove it (see section 5.6.2).
2. Slacken off and remove the rear 514 and front 512
stock retention screws.
3. Remove the filler piece 511 from the magazine stock.
4. Lift the system out of the stock.
W
WARNING
Rifle is ready to fire and may lead to death or severe injuries.
• There must be no magazine in the gun.
• Before stripping your gun, ensure once again that it is unloaded (see section 5.6).
Figure 16
14SIG1027_OM-SSG3000-USA_MiniManual_PeaseREV05.indd 47
3/27/14 11:17 AM
See also other documents in the category SIG SAUER Sports and recreation:
- AIRSOFT PISTOL (Handling & Safety) (20 pages)
- P239 (88 pages)
- P238 (68 pages)
- P226 X-Five (21 pages)
- P250 (68 pages)
- P290 (68 pages)
- P320 (68 pages)
- P556 (60 pages)
- SP2022/SP2022М (64 pages)
- SP2340 (24 pages)
- MOSQUITO (28 pages)
- P232 (48 pages)
- 1911 (15 pages)
- 1911 Ultra Addendum (2 pages)
- 1911 .22LR (64 pages)
- P522 Pistol (31 pages)
- P210 (20 pages)
- BLASER R93 (24 pages)
- BLASER K95 (24 pages)
- BLASER Tac2 (36 pages)
- SIG516 Rifle (96 pages)
- SIG716 Rifle (96 pages)
- SIG522 Rifle (31 pages)
- SIG 551-A1 Rifle (100 pages)
- SIG556 (104 pages)
- SIG556xi (84 pages)
- SIG556 Grip-Light Operating (4 pages)
- SIGM400 Rifle (84 pages)
- SIG50 (60 pages)
- SHR 970 (20 pages)
- SWISS ARMS SG552 (33 pages)
- MAGPUL CTR Stock (1 page)
- SIG522 and SIG556 Charging handle (2 pages)
- SIG522 Sight Kit Installation (2 pages)
- SIG522 Barrel Removal and Replacement (1 page)
- SIG522 Recoil Spring Upgrade (2 pages)